> For the complete documentation index, see [llms.txt](https://konstru.gitbook.io/konstru-manual/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://konstru.gitbook.io/konstru-manual/konstru-revit/konstru-sap.md).

# Konstru SAP

Supported Versions: 17,18,19,20

### SAP GEOMETRY

![Konstru-Get-Beam-v2.png](https://konstru.zendesk.com/hc/article_attachments/115010860667/Konstru-Get-Beam-v2.png) Beams\
Konstru beams are horizontal SAP2000 frames.

![](https://konstru.zendesk.com/hc/article_attachments/115003630711/mceclip0.png) Lines

Konstru Lines are SAP2000 Frames with "None" Section applied.

![Konstru-Get-Brace.png](https://konstru.zendesk.com/hc/article_attachments/115010984908/Konstru-Get-Brace.png)Braces\
Konstru braces are diagonal SAP2000 frames.

![Konstru-Get-Cable.png](https://konstru.zendesk.com/hc/article_attachments/115010862527/Konstru-Get-Cable.png) Cables\
Konstru Cables are SAP2000 cables.

![Konstru-Get-Column.png](https://konstru.zendesk.com/hc/article_attachments/115010984788/Konstru-Get-Column.png)Columns\
Konstru columns are vertical SAP2000 frames.

![Konstru-Get-Floor.png](https://konstru.zendesk.com/hc/article_attachments/115010984668/Konstru-Get-Floor.png) Floors\
Konstru floors are horizontal SAP2000 areas, outline based at the top. Sloped floors are not supported.

![Konstru-Get-Grid-v2.png](https://konstru.zendesk.com/hc/article_attachments/115010859907/Konstru-Get-Grid-v2.png) Grids\
SAP2000 Gridlines can only be uploaded to Konstru but not downloaded.

![Konstru-Get-Group.png](https://konstru.zendesk.com/hc/article_attachments/115010984168/Konstru-Get-Group.png) Groups\
Konstru groups are SAP2000 groups.\
Groups have no GUID in SAP2000 so Konstru uses names as unique ids. If a group is renamed Konstru shows one deleted group and one new group for the next upload instead of a modified group.

![Konstru-Get-Level.png](https://konstru.zendesk.com/hc/article_attachments/115010862387/Konstru-Get-Level.png) Levels\
Konstru levels are not supported in SAP2000.

![Konstru-Standard-Profiles-Create-Circular-Profile.png](https://konstru.zendesk.com/hc/article_attachments/115010987688/Konstru-Standard-Profiles-Create-Circular-Profile.png) Section profiles\
Custom sections in regular shapes (I,C,W,Rectangular etc) are supported. Irregular shapes are currently not supported.

![Konstru-Standard-Profiles-Create-Wall-Floor-Profile.png](https://konstru.zendesk.com/hc/article_attachments/115010862967/Konstru-Standard-Profiles-Create-Wall-Floor-Profile.png)Structural Profiles (Wall or Floor layers)\
Structural Profiles are automatically created on download from Konstru.

![Konstru-Get-Wall.png](https://konstru.zendesk.com/hc/article_attachments/115010860007/Konstru-Get-Wall.png)Walls\
Konstru walls are vertical SAP2000 areas. Curved walls are not supported. Sloped walls are not supported. Wall openings are supported.

### SAP ANALYSIS OBJECTS

#### Point Load

#### Linear Load

#### Area Load

#### Load Pattern

#### Load Case

#### Load Combination

#### Restraints

#### Releases

#### Nodes/Joints