> For the complete documentation index, see [llms.txt](https://konstru.gitbook.io/konstru-manual/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://konstru.gitbook.io/konstru-manual/konstru-revit/konstru-tekla.md).

# Konstru Tekla

Konstru for Detailers

![Konstru-Get-Attribute.png](https://konstru.zendesk.com/hc/article_attachments/115010862467/Konstru-Get-Attribute.png) Attributes\
Konstru attributes are Tekla attributes.

![Konstru-Get-Beam-v2.png](https://konstru.zendesk.com/hc/article_attachments/115010860667/Konstru-Get-Beam-v2.png) Beams\
Konstru beams are Tekla beams.

![Konstru-Get-Brace.png](https://konstru.zendesk.com/hc/article_attachments/115010984908/Konstru-Get-Brace.png)Braces\
Konstru braces are Tekla braces.

![Konstru-Get-Cable.png](https://konstru.zendesk.com/hc/article_attachments/115010862527/Konstru-Get-Cable.png) Cables\
Konstru cables are Tekla beams.\
Cables are translated into beams using the word "CABLE" in its profile section. Any beam with a "CABLE" profile section will be uploaded as a cable.

![Konstru-Get-Column.png](https://konstru.zendesk.com/hc/article_attachments/115010984788/Konstru-Get-Column.png)Columns\
Konstru columns are Tekla columns.

![Konstru-Get-Floor.png](https://konstru.zendesk.com/hc/article_attachments/115010984668/Konstru-Get-Floor.png) Floors\
Konstru floors are Tekla floors, outline based at the top, openings are added as floor openings.

![Konstru-Get-Grid-v2.png](https://konstru.zendesk.com/hc/article_attachments/115010859907/Konstru-Get-Grid-v2.png) Grids\
Konstru grids are Tekla grids.

![Konstru-Get-Level.png](https://konstru.zendesk.com/hc/article_attachments/115010862387/Konstru-Get-Level.png) Levels\
Konstru levels are Tekla levels.

![Konstru-Get-Opening.png](https://konstru.zendesk.com/hc/article_attachments/115010987148/Konstru-Get-Opening.png) Openings (hosted)\
Konstru floor openings are working in Tekla.

![Konstru-Standard-Profiles-Create-Circular-Profile.png](https://konstru.zendesk.com/hc/article_attachments/115010987688/Konstru-Standard-Profiles-Create-Circular-Profile.png) Section profiles\
Revit represents double angles and channels as single entities with one reference line. In order to keep it a one-to-one relationship when translating to Tekla, Tekla custom parts are used to create these elements. Custom parts named "Double Angles (Equal)", "Double Angles (LLH)", and "Double Angles (LLV)", with angle and channel single profiles are used. Revit Short Leg Back to Back (SLBB) equals Tekla Long Leg Horizontal (LLH), and Revit Long Leg Back to Back equals Tekla Long Leg Vertical (LLV). Once an element is created as a particular type (Equal, LLH, or LLV), it cannot be changed from that type, only the single profile string, spacing, and overall orientation can be changed.

![Konstru-Standard-Profiles-Create-Wall-Floor-Profile.png](https://konstru.zendesk.com/hc/article_attachments/115010862967/Konstru-Standard-Profiles-Create-Wall-Floor-Profile.png)Structural Profiles (Wall or Floor layers)\
Konstru can im- or export structural profiles and rebuild their layers. Avoid zero width or membrane layers.

![Konstru-Get-Wall.png](https://konstru.zendesk.com/hc/article_attachments/115010860007/Konstru-Get-Wall.png)Walls\
Konstru walls are Tekla walls